42/48
OPERATING USE
F
1
TRAYS SUPPLY
General tips for good operation
• Make sure that the products are free to move.
• If possible, do not place bags side by side if their ends
could become entangled during feeding.
•
Supply cones to the bottom tray
.
• Supply the largest bags to the middle trays.
F. 30
Products supply
• Open the door and pull the trays out until they stop.
•
Supply products starting from the innermost part (motor side), until there is no available space
left on any spiral
.
F. 31
Position the bags making sure that their ends will not become entangled during feeding.
Products type
•
The room used to load the cones is the lower one. The cones must be loaded with the tip
upwards, taking care to introduce a single-cone for each step of the spiral.
•
The products to stick must be loaded with the stick upwards.
