247
7.
Insert the new cartridge at a slight angle into the ink cartridge holder as shown. Then push it all the
way down until it clicks into place.
8.
After you replace all the cartridges that need replacing, lower the scanner unit and select
Completed
on the LCD screen.
The print head moves to its home position and the product starts charging the ink. This takes a few
minutes. When you see a completion message on the LCD screen, ink replacement is complete.
Note:
If you see an error screen telling you an ink cartridge is installed incorrectly, lift up the scanner
unit and press the ink cartridge down until it clicks into place. When you're finished, close the
scanner unit.
Caution:
Do not turn off the product while ink is charging or you may not be able to print.
Caution:
If you remove an ink cartridge for later use, recap the ink cartridge using the cap that came
with it to prevent the ink from drying out and to protect the surrounding area from getting smeared by ink.
Store the ink cartridge in the same environment as the product. Do not leave the product with the ink
cartridges removed for an extended period of time. Otherwise, ink remaining in the print head nozzles
may dry out and you may not be able to print.
Parent topic:
Replacing Ink Cartridges and Maintenance Boxes
Downloaded from
Summary of Contents for XP-970 Series
