Using the Waypoint Feature
Registering a base point
You need to register the base point in advance to use the Waypoint feature.
A
Move to the location you want to use as the base point
B
Register the base point (Reference Value Setting)
U
“About the Reference Value Setting” on page 121
Note:
When Reference Value Setting is complete, make sure that the small second hand points to
+
(success). If it points to
-
(failure), registering the base point is not complete.
c
Important:
After registering the base point, do not make a base point setting again until you have finished using the
Waypoint feature. The base point has been changed to an unintended location.
<Example> When performing basic altitude calibration, the location of the base point changes
Changing the Distance Range
You can change the range (maximum value) for the linear distance displayed in three stages. Set the Distance Range
according to the distance to the base point.
Distance Range
Dial display
Minimum Distance While
Measuring
0 to 9,900 m (9.9 km)
100
100 m (0.1 km)
0 to 99,000 m (99 km)
1000
1,000 m (1 km)
0 to 990,000 m (990 km)
10000
10,000 m (10 km)
MB73 (TR-MB7) User’s Guide
Waypoint Feature (COM)
97
Summary of Contents for Trume TR-MB7
Page 1: ......
