65
Chapter 3 Advanced Usage
USB Interface Settings
Class
•
Vendor Class (default setting)
•
Printer Class
IEEE1284 Device ID
•
Do not output IEEE1284 Device ID
•
Output IEEE1284 Device ID (default setting)
USB power-saving function
•
Enable
•
Disable (default setting)
Interface switch waiting time
Select the number of seconds from 1 to 10 in increments of 1 second, or 60 seconds.
Default setting: 10 seconds
Main connection interface
•
UIB
•
Built-in USB
•
Ethernet/Wi-Fi
•
Auto (default setting)
•
No main connection I/F
Auto Line Feed
•
Always disabled (default setting)
•
Always enabled
•
The Class setting is applied only to the USB Type B connector.
•
The USB power-saving function is valid only when the USB interface communication condition
is set to the vendor-defined class and the system configuration is set so that the USB driver can
support the USB power-saving function.
•
When using this printer with multiple interfaces, make sure the interface that is always
connected to be set as the main connection.
•
You cannot use wired LAN and wireless LAN at the same time.
•
The displayed items vary depending on the interface configuration.
•
For information about the function, see
"Printing Using Multiple Interfaces" on page 28.
This is only enabled when using a serial interface. When using another interface, make settings by
using the DIP switches.
