Epson TM-T88VI-iHUB, Reference Manual

Page: 73 / 156

73
Chapter 3 Advanced Usage
3
Software Setting Mode
Set the printer's memory switches and customized values.

Print density

Auto reduction of amount of paper to use

Enabling/disabling paper autocutting at cover close

Paper width setting

Auto replacement of font

Print speed

Command execution (offline)

Specification for the top margin by backfeed

Optional external buzzer control

Interface setting

Communication conditions using a USB interface

Interface switch wait time

Main interface selection

Enabling/disabling Display when interface is activating

Power supply capacity

Select paper sensor(s) to output paper-end signals

ERROR signal when an error occurs

Print data parsing settings

Select mode for the USB port with charging function
Follow the steps below.
1
After running a self-test, hold down the Feed button for at least one second to enter
the Mode selection.
The Mode selection guidance is printed, and the Paper LED flashes.
2
Briefly press the Feed button three times (less than one second), hold it down for at
least one second to enter the Software settings mode (Customized value setting).
The Software setting mode guidance is printed, and the Paper LED flashes.
For details on the memory switches and customized values, see "Software Settings" on page 57 .