43
Chapter 3 Printer Functions and Settings
3
Amount of top margin by backfeed
Selectable from levels 15 ~ 2 mm (0.5 mm interval)
Default setting: level 15 mm
Auto paper feed&cut at cover close
•
Cuts
•
Does not cut (default setting)
Character code table defaults
Selectable from 43 pages including user defined page
Initial setting: PC437: USA, Standard Europe
International character defaults
Selectable from 18 sets
Initial setting: USA
Font A auto replacement
•
Does not replace (default setting)
•
Font B
Font B auto replacement
•
Does not replace (default setting)
•
Font A
•
Remove all ejected paper before printing with backfeed.
•
Disable the automatic top logo setting when enabling backfeed.
•
You cannot use backfeed in the following cases even if you have enabled backfeed.
∗
Immediately after auto cutting while the cover is closed.
∗
While the self-test is in progress.
•
If setting a top margin of 5 mm {0.2"} or less, confirm that no errors occur in your environment of
usage. Usage in a hot and humid environment or usage of paper that curls easily may increase
the risk of paper jams.
•
When implementing a backfeed, rubbing smears may occur due to slack in the paper. We
recommend using thermal paper with high rub resistance.
