Epson TM-T88VI-DT2 Technical Reference Manual Download Page 26

Page: 26 / 165

Chapter 2 Setup

Connecting the LAN

Connect the LAN cable to the Ethernet port. (See

Network settings such as the IP address are set using the TM-T88VI-DT2 Utility or TMNet WebConfig.

Attaching the Customer Display

For the method to use dedicated customer display (DM-D110 for TM-T88V-DT/ TM-T88VI-DT2), see the
“DM-D110/ DM-D210 Technical Reference Guide”.

For the method to attach a DM-D30, see the “DM-D30 Technical Reference Guide”.

The USB port of the DM-D30 cannot be used.

•

Systems that use TM-DT software
This is enabled using EPSON TMNet WebConfig.

•

PC-POS System
The customer display is directly controlled from the application using Advanced Printer Driver for DM-D,
OPOS APD, or the like.

Summary of Contents for TM-T88VI-DT2






































































































































































Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands

Epson TM-T88VI-DT2, Technical Reference Manual

Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands