Epson TM-T88VI-DT2 Technical Reference Manual Download Page 151

Page: 151 / 165

151

Product Specifications

BIOS

This section describes the controller BIOS.

Starting and Ending BIOS Setup

The following describes the methods for starting and ending BIOS Setup.

Starting

Confirm that the power of this product is off and then connect the display, keyboard,
and mouse.

While pressing the [Delete] key on the keyboard, turn the power for this product on.

BIOS Setup will start up.

Ending

When the Save & Exit menu is displayed, select "Discard Changes and Reset" if you do
not want to save settings, or select "Save Changes and Reset" if you do want to save
the settings.

Follow the on-screen instructions and select [Yes].

BIOS Setup ends and this product starts up.

Settings for the USB 2.0 Charging Port

By default settings, the USB 2.0 port (Type-C) is a charging-dedicated port. If enabling communication, per-
form BIOS Setup settings.

Once BIOS Setup starts up, select [Chipset] - [USB Configuration] - [Type-C Port
Charge].

Press [Enter] to change the Mode.

Press [F4] to save the settings.

Item

Description

Mode 1

Charging, Communication

Mode 2

Dedicated Charging (Factory default)

Summary of Contents for TM-T88VI-DT2






































































































































































Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands

Epson TM-T88VI-DT2, Technical Reference Manual

Search results

Summary of Contents for TM-T88VI-DT2

Reviews:

Related manuals for TM-T88VI-DT2

Brands by name

Popular brands