Epson tm-m30, Technical Reference Manual

Page: 48 / 120

48
∗
1: Supported by Ver. 3.2.0 or later.
∗
2: Enabled only under the following conditions.
Epson TM Utility for iOS/Android Ver.3.6.0 or later
TM-m30 Utility for Windows Ver.1.20 or later
Firmware version 1.13 ESC/POS or later
Functions
Receive buffer capacity
•
4KB (initial setting)
•
45 bytes
BUSY condition
•
Receive buffer full/Offline (initial setting)
•
Receive buffer full
Auto line feed
•
Normally disabled (initial setting)
•
Normally enabled
USB power-saving function
•
Disabled
•
Enabled (initial setting)
Communication condition of
Bluetooth
interface
✔ ✔
Bluetooth communication interval during power
saving mode
*2
✔ ✔ ✔
•
For information about how to use the software setting mode, see "Software Setting Mode" on
page 62 .
•
All items can be set with ESC/POS commands.
The receive buffer capacity for the
Bluetooth
interface is 64 K bytes.
In either case above, the printer enters the BUSY state after power is turned on, and when a self-test
is being run.
The USB power-saving function is valid only when the USB interface communication condition is
set to the vendor-defined class and the system configuration is set so that the USB driver can
support the USB power-saving function.
Item\Method
TM Utility for iOS,
for Android
TM-m30 Utility
for Windows
Software
Setting Mode