Epson tm-m30 Technical Reference Manual Download Page 32

Page: 32 / 120

Connecting the Optional Wireless LAN Unit

The optional Wireless LAN cable set (OT-WL02/OT-WL05/OT-WL06) enables you to use the product with a
Wi-Fi connection.

For more information, refer to Technical Reference Guide of the Wireless LAN cable set.

Connecting the Optional Customer Display

You can connect the customer display (DM-D30) to this product, using USB connection.

For more information, refer to "DM-D30 Technical Reference Guide".

•

Be sure to turn off the printer when connecting the Wireless LAN unit.

•

Depending on the installation conditions of the printer and the routing for cables connected to it,
the status of the radio waves for the Wireless LAN unit may decline. If this does happen, use an
extension cable.

•

This option may be included with this product, depends on the models.

•

The shape of the Wireless LAN unit varies depending on the model.

Be sure to turn off the printer when connecting the customer display.

Summary of Contents for tm-m30

























































































































Search results

Summary of Contents for tm-m30

Reviews:

Related manuals for tm-m30

Brands by name

Popular brands

Epson tm-m30, Technical Reference Manual

Search results

Summary of Contents for tm-m30

Reviews:

Related manuals for tm-m30

Brands by name

Popular brands