Epson TM-L90-i, Technical Reference Manual

Page: 36 / 151

36
*: Paper for h ig h-speed pr inting . Depe n d ing o n t he memory sw it ch (c u s t om i zed val u es) se tting s, t h i s paper ca n
allow pr inting a t t he pr int er's max i m u m pr inting speed (Level 9: approx i ma t ely 150mm/s).
Die-cut label paper/
Continuous label paper

HD-75* (Nippon Paper Industries Co., Ltd.)

HW76B* (Nippon Paper Industries Co., Ltd.)

HW76C* (Nippon Paper Industries Co., Ltd.

KL470* (NAKAGAWA MFG(USA).Inc.)

KL80GT* (NAKAGAWA MFG (Germany). GmbH.)

150HA* (Ricoh Co., Ltd.)

Paper must not be pasted to the paper roll spool.

If a manual cutter is used to cut paper with a thickness of 100
μ
m or greater, the paper
will slide out of position easily. Take special care when cutting the paper.

Using roll paper with an inside diameter of 25.4 mm {1"} or less may decrease the detec-
tion accuracy of the roll paper near-end sensor.

To ensure high printing quality and performance, it is recommended that you make
changes to the printing density settings (
"Customized value" on page 97 ) according to
the roll paper that is used.