Epson TM-L90-i, Technical Reference Manual

Page: 93 / 151

Chapter 2 Setup
93
2
• L3 : (L2+1.5) mm
• L4 : (L2*2/5) mm

If L2 i s less t ha n 4mm: (L2 x 1/2)
• L5 : (L1-L2-3) mm
• L6 : 4.7 mm(F i xed)
• If t he paper w i d t h i s 78mm or g rea t er: 70mm

If t he paper w i d t h i s less t ha n 78mm: (paper w i d t h - 8)mm
Starting auto setting mode
1
Make sure the power to the printer is off.
2
Open the roll paper cover.
3
Load the roll paper.
For de t a i l, refer t o "I n s t all ing a n d Replac ing Roll Paper" o n pa g e 131
4
Press the FEED button while turning the power on.
5
When the ERROR LED comes on, goes out, and then comes on again,
release the FEED button.
6
Press the FEED button six times.
7
Close the roll paper cover.
The paper i s fed a ut oma ti cally, a n d t he n ew paper layo ut se tting i s saved.
O n ce a se tting i s comple t ed, t he a ut o se tting mode e n ds a n d t he pr int er re tu r n s t o n ormal
pr inting s t a tu s.
Feed button