Epson TM-L90-i, Technical Reference Manual

Page: 97 / 151

Chapter 2 Setup
97
2
Memory Switch 8
* If t he power t o t h i s pr int er i s tu r n ed o n w it h paper se t b ut w it ho ut a paper layo ut se tting , t he
le ngt h of t he paper w i ll be fed a ut oma ti cally t o de t erm in e t he t ype of paper (refer t o "A ut o paper
de t erm in a ti o n " o n pa g e 95 ).
Customized value
Selection of the NV user memory capacity
• 1 KB ( initi al se tting )
• 64 KB
• 128 KB
• 192 KB
SW Function ON OFF
Initial
setting
8-1 Reserved -- -- OFF
8-2
Method to recover from the
paper layout error
Receive the
command
Receive the
command or the
cover open/close.
OFF
8-3
PAPER LED coming on when an
near-end detected
Does not come on Comes on OFF
8-4
S e l e c t i o n o f t h e m a x i m u m
l e n g t h o f a u t o ma t i c p a p e r
measurement *
300 mm 160 mm OFF
8-5
Enable left or right margin of
bar code print
Enables margin
Does not enable
margin
OFF
8-6
Fe e d i n g p a p e r t o t h e p r i n t
starting position at power on
Disabled Enabled OFF
8-7 Reserved -- -- OFF
8-8
P r i n t e r c o v e r o p e n d u r i n g
operation
Errors that can possi-
bly recover
Errors that automati-
cally recover
ON
When the printer recovers from the paper layout error if Msw 8-2 is off, the automatic paper
measurement is done. If the settings for the paper layout are already stored in the NV
memory, these settings are overwritten with the result of the automatic paper recognition.
(refer to
"Paper layout settings by dismissing an error" on page 94 )