Epson TM-L90-i, Technical Reference Manual

Page: 94 / 151

94
Paper layout settings by dismissing an error
If paper i s loaded t ha t i s d i ffere nt from t he se t paper layo ut , a paper layo ut error occ u rs. (See
"Recoverable Errors" o n pa g e 25 ) If memory sw it ch 8-2 i s se t t o OFF, a n d t he follow ing proced u re
i s u sed t o d i sm i ss t he paper layo ut error, t he paper layo ut w i ll be a ut oma ti cally rese t accord ing
t o t he paper t ha t i s loaded.
1
Open the roll paper cover.
2
Load the roll paper.
For de t a i l, refer t o "I n s t all ing a n d Replac ing Roll Paper" o n pa g e 131 .
3
Close the roll paper cover.
The paper i s fed a ut oma ti cally, a n d t he n ew paper layo ut se tting i s saved.
Clearing paper layout settings
To dele t e a paper layo ut se tting s t ha t has bee n saved in t he pr int er a n d re tu r n t o t he initi al
se tting s ( n o paper layo ut se t ), u se t he follow ing proced u re.
1
Open the roll paper cover.
2
Press the FEED button inside the printer while turning the power on.
Press a n d hold t he FEED b utt o n unti l t he ERROR LED comes o n .
3
Press the FEED button four times.
4
Close the roll paper cover.
Paper layo ut se tting s are initi al i zed.
O n ce initi al i za ti o n i s comple t e, t he pr int er re tu r n s t o n ormal pr inting s t a tu s.

In some instances it will not be possible to use this setting if die-cut label paper with
black marks is used. If so, use a command to make the setting manually.

For more information about memory switch settings, see "Setting the Memory Switches"
on page 96 .

This function is available starting with firmware version 1.05.