manualshive.com logo in svg

Epson Stylus Pro 7400, Service Manual

The Epson Stylus Pro 7400 printer is a high-performance device designed for professional printing tasks. Unlock its full potential by accessing the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions and troubleshooting techniques, ensuring optimal performance of your printer.

Share
Download
background image

EPSON Stylus Pro 7400/7800/9400/9800

Revision B

Adjustment

Model Setting (when replacing the Main Board)

372

5.8  Model Setting (when replacing the Main Board)

†

Preparation for the setting

„

Devices
PC (The corresponding printer driver and STM must have been installed), 
New Main Board (after service part)

„

Programs
Adjustment Program, Transfer Tool (FWUpdate.exe), Latest firmware 
(*.*UPG file)

„

Printer
Ink cartridges, Waste Ink Pads and other consumables must have been 
installed. There should be no errors indicated on the LCD Panel.

*

Note "*": The consumables must be removed when writing on the new 

NVRAM as is conventionally done.

†

Procedure of the setting
1. Make a backup of the NVRAM on the printer. 

See Section 5.3.18 on page 

338.

2. Replace the Main Board with a new Main Board. 

See Section 4.2.4.1 on page 

232.

3. Turn the printer On and connect it with the PC using a USB cable.

3-1. Confirm that “UPDATE F/W” is displayed on the LCD panel.

4. Start up the Transfer Tool (FWPpdate.exe).

4-1. In the “Chose a port”, select a port followed by the connected printer 

name in parentheses.

5. Send the latest firmware to the printer using the Transfer Tool.

6. “F/W UPDATING” is displayed on the LCD panel, and the printer 

automatically reboots.

7. After the reboot, “NVRAM CLEAR OK” is displayed on the LCD. Press the 

MENU button.
7-1. Turn the printer Off.

8. Reboot the printer in Serviceman Mode.

8-1. Write the backup data onto the new NVRAM using the Adjustment 

Program.

C A U T I O N

The firmware comes in wide models (Stylus Pro 9400/9800) and 
narrow models (Stylus Pro 7400/7800) versions. Be sure to send a 
correct firmware.

Summary of Contents for Stylus Pro 7400













































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Stylus Pro 7400

MUTOH IP-500 Series User Manual preview
IP-500 Series
Brand: MUTOH Pages: 98
MUTOH DrafStation User Manual preview
DrafStation
Brand: MUTOH Pages: 141
Bullmer A200-2 Operating Manual preview
A200-2
Brand: Bullmer Pages: 16

Brands by name

Popular brands

Load more brands