Epson Stylus Photo785EPX, Service Manual

Page: 112 / 192

EPSON Stylus PHOTO 895/785EPX/915/825 Revision B
Disassembly and Assembly Disassembly 112
7. Remove the Pad holder (Paper return plate) from the ASF frame
Figure 4-70. Removing the Pad holder (Paper return plate)
C H E C K
P O I N T
„
Make sure that the each tip of the Torsion spring 25.7 is set in the
slot of the Pad holder and ASF frame. Refer to Figure 4-69.
"Removing the Torsion spring 25.7".
„
Make sure that the Pad holder moves smoothly after assembling
it to the ASF frame.
ASF Frame
Pad Holder
„
When you replace the ASF frame or Hopper with the new one,
make sure to lubricate the specific amount of G26 into the groove
on ASF frame. Refer to Figure 6-6. "Lubrication point 6" and
Figure 6-4. "Lubrication point 4" in the Chapter 6.
„
Fasten the ASF unit C.B.S-TITE (P4) 3x8 F/ZN screw (left screw
in the following figure), C.B.S-TITE (P4) 3x6 F/ZN screw (right
screw in the following figure) in the order of following figure.
Figure 4-71. ASF fixing screws fastening order
„
Tightening torque for screw
• C.B.S-TITE (P4) 3x6 F/ZN screw for ASF : 9+/-1 kgf.cm
(right screw in above figure)
• C.B.S-TITE(P4) 3x8 F/ZN screw for ASF : 9+/-1kgf.cm
(left screw in above figure)
2
1