Epson Stylus Photo785EPX, Service Manual

Page: 102 / 192

EPSON Stylus PHOTO 895/785EPX/915/825 Revision B
Disassembly and Assembly Disassembly 102
4.2.14 PF motor removal
1. Remove the Housing from the printer. (Refer to Section 4.2.1 "Housing
Removal")
2. Remove the Waste drain ink pad unit from the printer. (Refer to Section 4.2.6
"Waste drain ink pad unit removal")
3. Remove the printer mechanism from the printer (Refer to Section 4.2.7 "Printer
mechanism removal").
4. Remove the Front frame and Paper eject roller. (Refer to Section 4.2.13 "Paper
Eject Roller removal")
5. Remove the Plain washer and then remove the Combination gear 11.6, 36.8
carefully. Refer to Figure 4-51. "Removing the Plain washer and Combination
gear 11.6, 36.8".
Figure 4-51. Removing the Plain washer and Combination gear 11.6, 36.8
„
When you assemble the Front frame to the Printer mechanism,
set the CR unit to the left side and assemble the Front frame
from the right side. Be careful not damage the CR lock lever.
„
Fasten the Front frame with C.B.S Screw 3x6 F/ZN in the order
of 1, 2, 3.
Figure 4-50. Installing the Front Frame
„
Tightening torque for screw
• C.B.S 3x6 F/ZN screw for Front frame : 9+/-1 kgf.cm
1
2
3
Combination Gear 11.6, 36.8
Plain Washer