Adjustment
Rev. A
4-17
7. Press
“ENTER” key, and the sub menu below appears.
8.
Enter “4” for “Select menu : ?” to select “BK.-M Linear adjustment” in the menu.
9. Press
“ENTER” key, and the printer prints the adjustment pattern in black and magenta ink.
10. Look at the output to check if the lines for black and magenta are most closely aligned. Figure below
shows how to move the head vertical adjust lever to adjust different misalignment patterns.
;
Slant changes with a unit of 0.02 mm by moving the head angular adjust lever one step.
11. After adjust the head vertical adjustment lever by looking the adjustment pattern sheet, press
“SPACE” key to print adjustment pattern sheet agin.
12. If the new adjustment patterns is aligned within the specification, press “ENTER” key, and the sub
menu appears on the screen.
13. If there is no adjustment to be performed, enter “9” for “Select menu : ?” to select “Customer data
change/End” in the menu, then press “ENTER” key to return to the main menu.
14. Enter “9” for “Select menu : ?” then press “ENTER” key to exit the program.
...........
........................
......................
.....................
.......
.............
Ink charge
All adjustment
Select Menu ?_
BI-D (center value 0,0)
Gap Timming (center value 0,0)
.............
0
1
2
3
4
5
6
7
8
9
Stylus COLOR 800 J70C00E
Customer : Standard Customer Data <****> 12-03-1996
..........................
.......
..............................
Write to the Head voltage value
Head angular adjustment
BK.-M Linear adjustment
Head GAP timming adjustment
Bi-d adjustment
Print inspection
Ink discharge
Customer data change/End
Figure 4-22. “Adjustment/Inspection” Sub Menu
Black Color Black
Black Color Black
Paper feed
direction
Paper feed
direction
Move the Lever forward
Move the Lever backward
Head Vertical Adjustment
Lever
Figure 4-23. Use of the Head Vertical Adjust Lever
CAUTION
