Epson Stylus C82WN, Setup And Installation Manual

Page: 58 / 72

54
Appendix A: Configuration Settings
IP Address
Address used to identify a node on a network supporting the TCP/IP protocol. The
format for IP (Internet Protocol) addresses is a set of four bytes or segments, separated
by periods. Each byte can have any value from zero (0) to 254. If you need to enter an
address, make sure it conforms to the addressing scheme for your network and that it
does not conflict with the IP address for any other node on your network. The print
server’s default IP address is 192.0.0.192.
To view your computer’s IP address, subnet mask, and other information, do the
following:
Windows XP/2000/NT :
1. From the Windows Start menu, click
Run
.
2. Enter
cmd
in the text box and click
OK
. You see a DOS window.
3. At the prompt, type
ipconfig
and press
Enter
. You see your computer’s IP
configuration file, which includes the IP address.
4. At the prompt, type
exit
to exit the DOS window.
Windows Me/98/95:
1. From the Windows Start menu, click
Run
.
2. Enter
winipcfg
in the text box and click
OK
. You see the IP Configuration
window.
3. Select your wireless adapter from the drop-down list. You see IP configuration
information, including the IP address.
4. Click
OK
to close the IP Configuration window.
WorkGroup/Domain
Used on networks that support NetBIOS or NetBEUI. WP-Admin detects this
setting automatically, so you should not have to change it. The print server must be
on the same workgroup or domain as all computers using the printer.
Subnet Mask
Make sure this matches the subnet mask for your network. This setting will be
255.255.255.0
for most networks in the home or small office.
c82WN.book Page 54 Thursday, January 16, 2003 2:47 PM