3
Assembling the base unit
c
Caution:
Have two people working on either side to
assemble the base unit (26 kg).
1. Hold base upright left (A) and a horizontal
strut as shown. Then fix the strut to the base
using the two M6
×
30 hex socket head bolts
(B) with the hex wrench.
Note:
❏
An instruction sticker about the setting paper
basket is attached to the side of a horizontal
strut. Attach the strut front so that you can
read the instructions.
❏
Do not fasten the screws too tight. Leave a
room to adjust the position when you fasten
the screw on the other base upright.
2. Referring the Step 1, fix the other strut to the
base.
3. Hold the base upright left (C) as shown below,
fix the two struts to the base using the four M6
×
30 hex socket head bolts (D) with the hex
wrench.
4. Fasten eight screws on the both sides of the
base upright securely.
This completes assembly of the base unit. Before
attaching the paper basket, mount the printer on
the base unit.
Assembling the Printer
Unpacking the printer unit
c
Caution:
The printer unit is heavy and unwieldy. Have
two people unpack the printer unit, and four
people place the printer unit on top of the base
unit.
1. Open the box containing the printer unit and
remove the accessory box (E), the polystyrene
foam (F), and roll paper spindles (G).
2. Lift the box up and away from the printer unit,
then fold it and set aside. Also remove the
document box (H) and ink accessory kit (I).
A
B
D
C
E
F
F
G
I
H
