185
Receiving Faxes Automatically
To receive faxes automatically, make sure
Receive Mode
is set to
Auto
(the default setting for the
product).
To change the
Receive Mode
if necessary, select
Settings
>
General Settings
>
Fax Settings
>
Basic
Settings
>
Receive Mode
.
If an answering machine is connected, make sure the product's
Rings to Answer
setting is set higher
than the number of rings your answering machine is set to answer a call. For example, if the answering
machine is set to pick up on the fourth ring, set the product to pick up on the fifth ring or later.
Parent topic:
Related tasks
Receiving Faxes Manually
You can set up your product to receive faxes manually by setting the Receive Mode to
Manual
. This lets
you check for a fax tone on the connected telephone before receiving a fax.
1.
To change the Receive Mode, select
Settings
>
General Settings
>
Fax Settings
>
Basic
Settings
>
Receive Mode
and select
Manual
.
2.
When the connected telephone rings, answer the call.
3.
If you hear a fax tone, select
Fax
on the LCD display.
Note:
To receive a fax using the attached telephone instead of the product control panel, enable the
Fax Settings
>
Basic Settings
>
Remote Receive
setting.
4.
Select
Send/Receive
.
5.
Select
Recv.
.
6.
Select the
icon to start receiving the fax.
7.
Hang up the telephone.
Parent topic:
Related tasks
Summary of Contents for ST-4000
