background image

SpectroProofer Mounter 24"/44"

User’s Guide

Copyrights and Trademarks

2

Copyrights and Trademarks

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, 
mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information 
contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied to 
other printers.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, 
or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized 
modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s 
operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products 
other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of 
any interface cables other than those designated as Epson Approved Products by Seiko Epson Corporation.

EPSON

®

 is a registered trademark, and EPSON STYLUS™ and Exceed Your Vision are trademarks of Seiko Epson Corporation.

Microsoft

®

, Windows

®

, and Windows Vista

®

 are registered trademarks of Microsoft Corporation.

Apple

®

 and Macintosh

®

 are registered trademarks of Apple Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims 
any and all rights in those marks.

Copyright© 2008 Seiko Epson Corporation. All rights reserved.

Summary of Contents for SpectroProofer Mounter 24






























Reviews: