A
Put the cup supplied with the ink cleaner on the
metal tray, and pour approximately 10 ml of ink
cleaner into the cup.
B
Dampen the cleaning stick with ink cleaner.
Do not allow ink cleaner to drip from the
cleaning stick.
When dampening a clean-room wiper with ink
cleaner, use ink cleaner poured into a cup.
c
Important:
❏
Do not use ink cleaner that you have used
for cleaning to clean the next time. Using
dirty ink cleaner will make staining worse.
❏
Tightly close the lid of the ink cleaner and
store it at room temperature out of direct
sunlight and away from high
temperatures or humidity.
❏
Used ink cleaner, cleaning stick, and
clean-room wipers are industrial waste.
Dispose of them in the same way as for
waste inks.
U
“Disposal of used consumables” on
Moving the Print Head
This section describes how to move to cleaning position
of the print head.
c
Important:
Be sure to follow the steps below when positioning
the print head. Moving the print head manually
could cause malfunction.
Buttons that are used in the following settings
A
Confirm that the status screen shown below is
displayed, and then press the
#
button.
The Maintenance menu will be displayed.
B
Use the
d
/
u
buttons to select
Head
Maintenance
and press the
Z
button.
C
Press the
d
/
u
buttons to select
Regular
Cleaning
, and then press the
Z
button two
times.
The print head moves to the cleaning position.
SC-F9400H Series/SC-F9400 Series Operator's Guide
Maintenance
34
