Epson SC-F9400 Series Operator'S Manual Download Page 52

Page: 52 / 57

After replacing the flushing pad, press the

button.

Close the maintenance cover, and then press the

button.

A confirmation message is displayed on the
screen. Check the content of the message, select

Yes

, and then press the

button.

Disposing of used head cleaning sets

“Disposal” on

page 52

Disposal of used
consumables

Disposal

The following used parts with adhered ink are classified
as industrial waste.

❏

Ink packs

❏

Chip unit

❏

Cleaning stick

❏

Clean-room wiper

❏

ink cleaner

❏

Waste ink

❏

Waste Ink Bottle

❏

Wiper unit

❏

Flushing pad

❏

Media after printing

Dispose of items according to local laws and regulations.
For example, contract a industrial waste disposal
company for disposal. In such cases, submit the “Safety
data sheet” to the industrial waste disposal company.

You can download it at your local Epson Web site.

SC-F9400H Series/SC-F9400 Series Operator's Guide

Maintenance

Summary of Contents for SC-F9400 Series


























































Search results

Summary of Contents for SC-F9400 Series

Reviews:

Related manuals for SC-F9400 Series

Brands by name

Popular brands

Epson SC-F9400 Series, Operator'S Manual

Search results

Summary of Contents for SC-F9400 Series

Reviews:

Related manuals for SC-F9400 Series

Brands by name

Popular brands