P
Confirm that the left edge of the media is within
the range of the label's rectangle in the
illustration below.
c
Important:
If the left edge of the media is not within the
black square of the label, do steps 5 to 16 in
reverse to adjust the position of the roll holder.
Do not attempt to reposition the roll holders
while they are inserted in the media.
Q
R
Hold the center of the media in one hand, and
pull it straight until it is aligned with the bottom
edge of the label on the heater.
Do not pull the media with both hands. This
could cause the media to skew or move around.
SC-F9400H Series/SC-F9400 Series Operator's Guide
Basic Operations
13
