4 SEGMENT OPTION GENERATOR SOG6008
28
EPSON
S5U1C60N08D MANUAL
(DEVELOPMENT SOFTWARE TOOL FOR S1C60N08)
EPROM selection
When selecting file is completed, the following
message is output to ask the operator whether to
generate the HEX file.
(1) When debugging the program with the
evaluation board, HEX file is needed, so enter
"Y
". If "N
" is entered, no HEX file is
generated and only document file is generated.
(2) For the option ROM selection menu displayed
when "Y
" is entered in Step (1), select the
EPROM to be used for setting evaluation board
options.
When a series of operations are complete, the
SOG6008 generates files. If no error is committed
while setting segment options, "MAKING FILE IS
COMPLETED" will be displayed and the
SOG6008 program will be terminated.
END OF OPTION SETTING.
DO YOU MAKE HEX FILE (Y/N) ? Y
. . (1)
*** OPTION EPROM SELECT MENU ***
1. 27C64
2. 27C128
3. 27C256
4. 27C512
PLEASE SELECT NO.? 2
. . (2)
2. 27C128 SELECTED
MAKING FILE IS COMPLETED.
■
Error messages
S
N
R
D
Out Port Set Error
The data was written in an invalid format.
The segment number outside the specificable range was specified.
The segment memory address or data bit outside the specificable range was specified.
Error message
(Syntax Error)
(Segment No. Select Error)
(RAM Address Select Error)
(Duprication Error)
Explanation
The same data (SEG port No., segment memory address, or data bit) was specified
more then once.
The output specifications were not set in units of two ports.
Summary of Contents for S5U1C60N08D
Page 4: ......
