3
S5U1C33001H
(Ver. 4)
■
FUNCTIONAL OUTLINE
The functions of the S5U1C33001H are outlined below.
(1) Break functions
• PC break function
• Data break function
• Forced break function
• External forced break function (BRK IN pin input)
• Area break function
• Bus break function
- Logical or physical address is selectable.
(2) Trace functions
• Normal PC trace function/normal bus trace function
- Either the 1M clock cycles after a go command or the last 1M clock cycles before a break can be traced.
- The bus trace function allows selection of logical or physical addresses.
• Area PC trace function/area bus trace function
- Only the area between trace trigger 1 and trace trigger 2 is traced.
- Up to 1M clock cycles can be traced.
- The bus trace function allows selection of logical or physical addresses.
• Bus break trigger trace function
• TRC IN pin input signal trace function
• User logic signal trace function
(3) Measurement of the target program execution time
• The total time within an area can be measured in area trace mode.
(4) Flash memory writing function
(5) Flash programmer function
(6) Data transfer rate
• Execution rate: About 65KB/s
(7) Power supply to the target system
• 3.3 V and 1.8 V. The power supply monitoring function is available.
(8) Reset signal output to the target system
(9) Firmware update function
■
OPERATING ENVIRONMENT
As the host computer, the S5U1C33001H uses a PC with a USB port (USB 1.1) available. Windows 2000 or Windows XP
is recommended for the OS.
