RS3 RS4 Maintenance 4. Cable Unit
RS series Maintenance Rev.3
27
(21) Cut off two wire ties bundling the cables
Pull out the cable unit 2.
Wire tie
(22) Remove the Connector plate.
For details, refer to
3.3 Connector plate.
(23) Remove the Base cover.
For details, refer to
3.4 Base cover.
(24) Remove the D-sub connector from the plate securing the cables.
(25) Remove three air tubes.
Cut off two wire ties bundling the cables.
Wire tie
(26) Pull out the cable unit 2 and air tubes.
(Be careful about the connector not to be caught.)
