Epson ProofPlus TM-H6000III, Technical Reference Manual

Page: 29 / 140

Rev. E General Information 1-13
TM-H6000III Technical Reference Guide
1.4.2.3 Printable Area for validation paper
Note:
When reverse feed is performed in validation printing, keep the reverse feed within the range of the
printable area. Otherwise, a paper jam away occur.
1.4.2.4 Unprintable area for surface printing when Using the Image Scanner
❏
In single-pass processing, when image scanning is executed in combination with surface
printing, 40 mm (typical) from the edge of a check will be unprintable. If you need to print
on that area, do not perform single-pass processing and be sure to perform the sequence of
re-inserting the paper to do the image scan after the surface printing and paper ejection.
P
a
per f
eeding direction
P
a
per in
s
er
ting direction
70 (MIN.
68)
Validation s en s or po s ition
Print s tarting po s ition
La s t printing po s ition
Slip ejection s en s or po s ition
Printable Area 85.4
5.6
2 3 .2
15
1.5
18.4
3
.1
49.65
Pr
intab
le Area
3
2.8
71
(20)
29.65
8 line
s
pr
inting f
o
r 168
s
tep
s
(When appro
x
imately 4.2
3
mm (1/6”) f
eeding pitch)