62
Using Quick Wireless Connection (Windows)
You can create a Quick Wireless Connection USB Key to quickly connect the projector to a Windows
computer wirelessly. Then you can project your presentation and remove the key when you are done.
Note:
A USB flash drive is not included with your projector.
1.
Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection
(Windows/Mac) software.
Note:
See the
Epson iProjection Operation Guide (Windows/Mac)
for instructions.
2.
Turn on the projector.
3.
Press the
LAN
button on the remote control.
You see the LAN standby screen.
4.
Verify that an SSID and IP address are displayed.
5.
Remove the wireless LAN module from the projector.
6.
Insert the USB key into the same port used for the wireless LAN module.
You see a projected message that the network information update is complete.
7.
Remove the USB key.
8.
Reinsert the wireless LAN module into the projector.
9.
Insert the USB key into a USB port on your computer.
Note:
In Windows Vista, if you see the AutoPlay window, select
Run MPPLaunch.exe
, then select
Allow
on the next screen.
10. Follow the on-screen instructions to install the Epson iProjection (Windows/Mac) software.
Note:
If you see a Windows Firewall message, click
Yes
to disable the firewall. You need
administrator authority to install the software. If it is not installed automatically, double-click
MPPLaunch.exe
in the USB key.
After a few minutes, your computer image is displayed by the projector. If it does not appear, press
the
LAN
or
Source Search
button on your remote control or restart your computer.
11. Run your presentation as necessary.
Summary of Contents for Pro L1500UH
