47
6.
Replace the lens cover.
7.
If prompted, select
Yes
to calibrate the lens.
Note:
Lens calibration helps the projector to correctly acquire the lens position and adjustment
range, and can take up to 100 seconds to complete. When calibration is finished, the lens returns to
the same position it was in before calibration. (ELPX02 returns to the standard position.)
8.
When using one of the following lenses, select the lens type in the
Extended
menu: ELPLS04,
ELPLU02, ELPLR04, ELPLW04, ELPLM06, ELPLM07, or ELPLL07.
Parent topic:
Related tasks
Removing a Lens
You can remove a lens to replace it with a different lens.
Caution:
Remove the lens only when necessary and make sure the front of the projector is not facing up
when you remove the lens. This prevents dirt or dust from entering the projector and lowering the
projection quality. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to
the lens surface.
1.
Center the lens using the
Lens Shift
(remote control) or
Lens
(control panel) button.
2.
Turn off the projector and unplug the power cord.
Summary of Contents for Pro L1500UH
