manualshive.com logo in svg

Epson PowerRIP Stylus, User Manual, Page: 42 / 80

Share
Download
Epson PowerRIP Stylus User Manual Download Page 42

Buttons

Operate

Turns the printer on and off.

c

Caution:

Always turn off the printer by pressing the 

Operate

button. Then wait until the 

Operate

 light stops flashing

before unplugging the printer.

Never turn off the printer while the 

Pause

 light is

flashing.

Font

Does not apply to Macintosh computers. Use your
software program to select fonts.

Load/Eject

Loads or ejects a sheet of paper. Paper normally
loads and ejects automatically.

Pause

Stops printing temporarily. Press it again to resume
printing.

Economy/Condensed

Selects economy mode. Condensed mode does not
apply to Macintosh computers.

Alt

Used to reset the printer. Press 

Alt + Pause

 to clear

the printer’s buffer and reset the printer settings to
their factory settings.

You also use the 

Alt

 button in combination with

other buttons when cleaning the print heads or
adjusting the paper thickness lever. See “Cleaning
the Print Heads” in Chapter 4 and “Loading
Envelopes and Heavy Paper” in Chapter 3 for more
information.

Controlling the Printer      

2-11

Summary of Contents for PowerRIP Stylus

















































































Reviews:

No comments