Epson PowerLite Pro Cinema LS10000, User Manual

Page: 89 / 204

• The antennas are built into the front of the projector and the transmitter. Make sure the antennas face
each other when setting up the devices.
• When checking the signal, place the projector and WirelessHD Transmitter close to each other and
make sure there are no other projectors operating nearby.
• Depending on the signal strength, the image's color information may be automatically discarded to
avoid any interruptions and maintain a constant connection. To avoid any deterioration in image
quality, adjust the position of the transmitter so that the
Reception setting is as strong as possible. If
no image is being input, the Reception setting displays 0% , even if the projector and transmitter are
connected.
Parent topic: Using WirelessHD
WirelessHD Remote Control Operation
The remote control lets you control the WirelessHD transmitter from almost anywhere in the room. You
must point the remote at the transmitter.
Make sure that you aim the remote control at the WirelessHD transmitter's remote receiver within the
distance and angles listed here.
Vertical
1 13 feet (4 m)
2 32 feet (10 m)
3 ± 40°
89