3
Turn on the power switch on the back of the projector. The
power
button on the projector turns blue.
4
Press the
power button on the projector or the
On
button on the
remote control. The power
light flashes blue, and then stays on.
Note:
To shut down the projector, press the
power button on the
projector twice or the
Standby
button on the remote control, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the remote control. Select
Extended
and press
Enter
. Select
Language
and press
Enter
. Select
your language and press
Enter
. Press the
Menu
button to exit the menu
system.
Adjust the image
1
If you don’t see an image, press the
Source
buttons on the remote
control or the
button on the projector to select the image source.
Note:
If you still see a blank screen or have other display problems, see
“Troubleshooting.”
2
Turn the horizontal and vertical lens shift dials to adjust the image
position and center it between the top and bottom of the screen.
3
To raise the image, adjust the front feet as shown below.
4
Turn the zoom ring to reduce or enlarge the image.
5
Turn the focus ring to sharpen the image.
6
Your projector automatically adjusts images that look like
or
,
but if necessary you can press the
or
buttons on the projector to
correct this.
Note:
When setting up the projector, make sure that it is placed level
to the screen in order to provide the best possible image quality. If you
must set up the projector at an angle, use the
or
buttons to correct
the image shape.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Choose which source
to display
Turn projector on
Access projector
menus
Turn off projector
display
Navigate projector
menus
Turn projector off
Switch between
2D and 3D
Control WirelessHD
functions
For more information on using the remote control, see the online
User’s
Guide
.