manualshive.com logo in svg

Epson PowerLite Home Cinema 5020UB, User Manual, Page: 100 / 108

Share
Download
Epson PowerLite Home Cinema 5020UB User Manual Download Page 100

Where to get help

Manual

For more information about using the projector, click the icon on your desktop 
to access the online manual (requires an Internet connection). If you don’t have 
a User’s Guide icon, you can install it from the projector CD or go to the Epson 
website, as described below.

Telephone support services

To use the EPSON

®

 PrivateLine

®

 Support service, call (800) 637-7661. This service 

is available 6 

AM

 to 8 

PM

, Pacific Time, Monday through Friday, for the duration 

of your warranty period.

You may also speak with a support specialist by calling (562) 276-4394 (US) or 
(905) 709-3839 (Canada), 6 

AM

 to 8 

PM

, Pacific Time, Monday through Friday, 

and 7 

AM

 to 4 

PM

, Pacific Time, Saturday.

Days and hours of support are subject to change without notice. Toll or long 
distance charges may apply.

Internet support

Visit 

www.epson.com/support

 (U.S.) or 

www.epson.ca/support

 

(Canada) for solutions to common problems. You can download utilities and 
documentation, get FAQs and troubleshooting advice, or e-mail Epson.

Registration

Register today to get product updates, special promotions, and customer-only 
offers. You can use the CD included with your projector or register online at 

www.epson.com/webreg

.

Optional accessories

For a list of optional accessories, see the online 

User’s Guide

.

You can purchase RF 3D glasses or other accessories from an EPSON authorized 
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you 
can purchase online at 

www.epsonstore.com

 (U.S. sales) or 

www.epson.ca

 

(Canadian sales).

EPSON and PowerLite are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of 
Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks 
of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice. 

© 2012 Epson America, Inc. 8/12 

 

Printed in XXXXXX 

CPD-37768

Summary of Contents for PowerLite Home Cinema 5020UB













































































































Reviews:

No comments