Power light
Status light
Lamp light
Temp light
Status and solution
Flashing blue
Flashing blue
Flashing
Flashing
When transferring settings between
rapidly
rapidly
orange rapidly
orange rapidly
projectors, writing may have failed
and a projector error may have
occurred. Turn the projector off,
unplug it, and contact Epson for
help.
Note:
If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic:
Solving Problems
Related references
Projector Setup Settings - Extended Menu
Where to Get Help
Projector Environmental Specifications
Related tasks
Cleaning the Air Filter and Vents
Replacing the Air Filter
Replacing the Lamp
Using the Projector Help Displays
You can display information to help you solve common problems using the projector's Help system.
1.
Turn on the projector.
2.
Press the
Home
button on the projector or the remote control.
3.
Use the arrow buttons to select
Help
.
4.
Press
Enter
.
You see the Help menu.
5.
Use the up and down arrow buttons to highlight the problem you want to solve.
6.
Press
Enter
to view the solutions.
7.
When you are finished, do one of the following:
• To select another problem to solve, press
Esc
.
158
Summary of Contents for PowerLite 640
