27
3
If you are using a CD-R/RW drive or Zip drive, plug
it into an electrical outlet if required.
4
Connect the drive to PictureMate:
●
For a flash memory drive, plug it into the
EXT/IF
port on the back of PictureMate.
●
For a CD-R/RW or Zip drive, connect its USB
cable to the
EXT/IF
port on the back of
PictureMate. Then insert a CD-R or Zip disk in
the drive.
Note:
If you insert a blank CD-R in the drive before
inserting a memory card in PictureMate, you may see an
error message. Eject the CD-R from the drive to clear the
error, insert your memory card, then re-insert the CD-R.
5
Press the
Save Photo
button on PictureMate to
begin saving your photos.
6
When you see this message, press
OK
.
Note:
If you see the message “Not enough memory on
backup media,” press
Cancel
and insert a new CD-R or
Zip disk, or connect a flash memory drive with more free
space.
7
When you see the
Beginning backup
confirmation, press
OK
. Then wait while your
photos are saved. This may take several minutes.
PictureMateR.book Page 27 Tuesday, May 17, 2005 10:17 AM