Installing the Optional Equipment
Page 27
Loading Slides and Film Directly on the Document Table
You can scan slides and film strips in the 4
×
5-inch (101.6
×
127 mm)
scanning area of the transparency unit. You can use film holders (as
described in the previous sections) or place them directly on the
document table.
Follow the steps below to scan film or slides.
1 Open the top of the transparency unit while holding the base down.
Hold the film by the
edges or use gloves.
Touching the film
surface with bare
hands can leave
fingerprints or other
marks on the film.
If the film size is
4"
×
5", it may be
easier to use the film
holder. If you place
the film directly the
document table, it
may be difficult to
pick up.
ref.book Page 27 Monday, September 28, 1998 4:24 PM
