Understanding SCSI Connections
Page 12
Setting the SCSI ID Number
The scanner’s default SCSI ID number is 2. If you add the scanner to a
system in which one of your SCSI devices already has SCSI ID 2, you
can change the ID number to an unused number using the rotary switch
at the rear of the scanner. See the table on the next page for a guide to
SCSI ID numbers. Then follow these steps to change the ID number:
1 Turn the scanner off.
2 Change the SCSI ID number.
3 Turn the scanner back on.
4 Restart your computer.
Make sure the
scanner is turned off
before changing the
SCSI ID number.
Do not set the SCSI
ID to an ID number
that is already
assigned to another
device otherwise the
computer, scanner,
and other devices will
not operate properly.
If you are using
Windows 98, see
Changing the SCSI ID
Number in
Windows 98 for more
information.
2
7
3
8
4
9
5
0
6
1
SCSI ID 2
ref.book Page 12 Monday, September 28, 1998 4:24 PM
