Epson Perfection 1200PHOTO, Service Manual

Page: 82 / 94

EPSON Perfection1200 Revision B
Appendix ADF: Disassembly 82
3. Insert (-) driver into the gap shown in the figure below, and remove the
white standard board by pushing it to the arrowed direction.
Figure 7-23. Removing the white standard board (1)
4. Release the lock of the shaft supports at right and left and remove the
roller shaft (rear).
Figure 7-24. Removing the white standard board (2)
Figure 7-25. Roller Removal
White
standard
board
Slide the white standard board to
this direction strongly and release
the hook.
Insert (-) driver into
this gap and push
Removed white
standard
Release the lock of
shaft supports.
Remove the
roller shaft (rear)