1. Introduction
Part Feeding 7.0 IF-240 Rev.5
3
1. Introduction
1.1 Overview
The following document is the property of Epson and may not be copied or circulated
without permission. The information contained in this document is subject to change
without notice for the purpose of product improvement. Before operating your product,
please read this document in order to ensure correct use of the product. Nevertheless, if you
meet difficulties during operation or maintenance, please, feel free to contact the supplier of
your region.
In this manual, the safety precautions that you must follow are classified as: “Danger”,
“Warning” and “NOTE”; the following symbols are used:
DANGER
Failure to observe the instruction may result in serious injury.
DANGER
Failure to observe the instruction may result in electrocution or
serious injury due to electric shock
WARNING
Failure to observe the instruction may result in injury or
property damage.
The user should read this information carefully to ensure the
correct use of the product, although failure to do so would not
result in injury.
REFER TO …
For more information on a specific subject, the reader should read another manual, or refer
to other paragraph.
WARNING
Epson shall not be liable whatsoever for any loss or damage
arising from a failure to observe the items specified in Safety
precautions. The customer is responsible for providing the
necessary instructions to the persons concerned.
All dimensions in this document are expressed in millimeters.
NOTE
NOTE
Summary of Contents for Part Feeding 7.0
