Epson Part Feeding 7.0, Manual, Page: 30 / 42

3. Transportation, handling, and installation
22 Part Feeding 7.0 IF-240 Rev.5
3. Transportation, handling, and installation
3.1 Packaging of the product, transportation and handling
The transportation of the product must be made in accordance with the specific terms
indicated on the package (top, bottom, fragile, etc.). In addition, pay particular attention to
the following points:
WARNING
- Be aware of the weight and take care when transporting the
system.
- Always hold the system firmly with two hands.
- The operator should not carry heavy shipping boxes by
himself.
- If the shipping box is to be left standing, it should be in a
horizontal position.
- Do not climb on the shipping box.
- Do not place heavy objects, on top of the shipping box.
The IF-240 is shipped in a cardboard box with the following dimensions:
IF-240
Dimensions 550 × 400 × 300 mm
Gross weight 12 kg
Table 3-1: gross weight and dimensions of the product when packaged
3.2 Before unpacking
Before unpacking, check the ShockWatch Label.
If the Shockwatch label is red, or if any evidence of damage during transit is detected, please
do the following:
Figure 3-1:ShockWatch
(A) Request that the carrier’s agent be present at the time of unpacking.
(B) Pay special attention to any damage on the exteriors of the product.
(C) If any damage has occurred, do not sign the delivery slip and contact the supplier of
your region immediately.
(D) In every case, make a notation on the delivery packing slip.
If the items received do not match your order, or are
damaged, do not sign the receipt, and contact the supplier of
your region as soon as possible.

NOTE