Epson M200, Service Manual

Page: 84 / 85

Confidential
Appendix Protection for Transportation 84
M200 / M205 / M100 / M105 Series Revision A
5.3.2 Securing the Paper Support/Paper Support Sub
† Purpose
To prevent damaging the Paper Support/Paper Support Sub by the shock during transportation.
† Risks if it is not performed
The Paper Support/Paper Support Sub will be scratched and the abrasion powder will be produced due to the
shock during transportation.
† Preparation
Prepare two pieces of strong tape
„
Multifunction Printer
•
1) Length: 60 mm, width: 22 mm, fold one end 5 ± 2 mm.
•
2) Length: 50 mm, width: 22 mm, fold one end 5 ± 2 mm.
„
Singlefunction Printer (3 tapes)
•
Length: 80 mm, width: 16 mm, fold one end 5 ± 2 mm.
† Method
„
Multifunction Printer
1. Attach the strong tape 1) to the position on the following diagram A and secure the Paper Support Sub.
2. Attach the strong tape 2) to the position on the following diagram B and secure the Paper Support.
Figure 5-3. Securing the Paper Support/Paper Support Sub (Multifunction Printer)
Diagram B
Paper Support Sub
Folded ends
Diagram A
Folded ends
Paper Support
Housing Left
Strong tape