5.
Press the
Pause
button or send data to the printer to leave the
micro adjust mode.
Note:
For both cut sheet and continuous paper, the printer remembers this new
position even after it has been turned off and back on.
Tear-Off
After you have finished printing, you can use the tear-off feature
to advance continuous paper on the push tractor to the tear-off
edge of the printer. You can then easily tear off printed sheets.
When you resume printing, the printer automatically feeds paper
back to the loading position so you can save paper that would
normally be lost between documents.
You can use the tear-off feature in two ways: by setting the default
setting to select auto tear-off mode, or by pressing the
Tear Off/Bin
button on the control panel.
If the perforation between pages is not aligned with the tear-off
edge, you can adjust the tear-off position using the micro adjust
feature as described in the previous section.
c
Caution:
❏
Never use the tear-off feature to reverse-feed labels; they
may come off their backing and jam the printer.
❏
Never reverse-feed continuous paper when using the pull
tractor; the paper could come off the pull tractor and jam
the printer.
R
Sunflower-E
Rev.D
A5 size Chapter 3
02/05/96
pass 1
Using the Printer
3-15