Epson LQ-2080, Hardware & Software Setup

Page: 20 / 24

PapU
booklet.fm Rev. A
A5-Format BookletENew.fm
4/28/99 Durchlauf 2
L
Proof-Abzeichnung:
K. Nishi
_______
N.Nomoto _______
J.Hoadley _______
20
Setting Up the Printer
6.
Insert a sheet of paper printable side down between the edge guides until it meets
resistance. The printer feeds the paper automatically and is ready to print.
Note:
Always close the printer cover before printing.
7.
Check the printer driver settings and change them if neccessary. Then send a print
job to the printer as described in the following chapter.
When the printer receives data, it prints the page and ejects it back onto the paper guide.
To continue printing your document, remove the printed page and insert a new sheet
of paper. If you need to eject a sheet, press the
Load/Eject
button.
c
Caution:
Never use the knob to adjust the top-of-form position or eject a sheet when
the printer is on; this may damage the printer or cause it to lose the top-of-
form position.
❚
Printing
■
Printing under Windows 95/98 and NT 4.0
1.
Select
Print Setup
or
Print
from the
File
menu of your application software. The
Print
or
Print Setup
dialog box appears.
2.
Make sure that your printer is selected and then click
Printer
,
Setup
,
Properties
,
or
Options
. (You may need to click a combination of these buttons.) The
Prop-
erties
or
Document Properties
window appears, and you see the
Paper
and
Graphics
menus (Windows 95/98) or the
Page Setup
and
Advanced
menus
(Windows NT 4.0). These menus contain the printer driver settings.
3.
To view a menu, click the corresponding tab at the top of the window.