background image

38

Top

Safety Instructions

Specifications

Troubleshooting

Part Names and 

Functions

Start Here

Cleaning

Initializing the 

Settings

Purpose-based Index

Key Menu Index

Frame and Table Lists

Changing the LW-PX900 Settings 

+

Auto cut

Sets whether or not to cut automatically.
When "Auto cut"is set to " On ", the function (Half cut) for 

precutting just the label part to make the backing paper 

easy to peel off is set.

Print density

Sets the print density.

Drop stop

This function is useful for affixing consecutively printed 

labels one at a time.
When "On" is selected, printed labels will not be scattered 

because they are stacked in the tape eject slot and a label is 

output each time a label is removed.

This function is only available when the label length is 

28 mm or more, "Auto cut" is set to "On", and "Half cut" is set 

to "Off".

Die-Cut pos

Adjusts the text position of die cut label.
Width pos: Adjusts the vertical positioning of text.

Length pos: Adjusts the horizontal positioning of text.

Backlight

Sets the display backlight to On or Off.

Language

You can select the language shown on the display from the 

following:

Dansk, Deutsch, English, Español, Français, Italiano, Nederlands, 

Norsk, Português-Br, Português-EU, Suomi, Svenska, Türkçe

inch:cm

The unit of length used to indicate the label size can be 

switched between inch and cm.

MEMO

Version: To make sure the version number that has been installed in 

the printer.

Procedure for setting

1.  Press 

 + 

 .

2.  Select the desired function with 

/

 and  

press 

 .

3.  Select the desired item with 

/

 and press 

 .

Summary of Contents for LABELWORKS PX





























































Reviews: