Epson LabelWorks LW-PX700 User Manual Download Page 15

Page: 15 / 58

Frame and Table Lists

Start Here

CAUTION

Depending on the environment where you use labels and

the nature of the adhered surface, the labels may be peeled

or discoloured, and the adhesive may remain on or damage

the adhered surface. Be sure to check the environment and

the nature of the adhered surface before use. K-Sun takes

no responsibility for any damage or loss due to the above

mentioned causes.

6. Attaching label

1. Peel off the backing paper.

2. Attach the label and rub it firmly.

7. Turning the Power Off

1. Press

The characters you have entered in the current session

are stored even after the printer is turned off. They are

displayed when it is turned on again.

2. Open the battery cover and then remove the

Li-ion battery.

If the AC adapter is connected, disconnect the AC

adapter from the printer.

CAUTION

• "Powering off." is displayed while turning off this printer.

Do not remove the Li-ion battery or disconnect the AC

adapter until this message disappears.

• When you don't use the printer for a long period of time,

remove the batteries (Li-ion battery or alkaline batteries),

disconnect the AC adapter, and remove the tape cartridge

from the printer.

Summary of Contents for LabelWorks LW-PX700



























































Search results

Summary of Contents for LabelWorks LW-PX700

Reviews:

Related manuals for LabelWorks LW-PX700

Brands by name

Popular brands

Epson LabelWorks LW-PX700, User Manual

Search results

Summary of Contents for LabelWorks LW-PX700

Reviews:

Related manuals for LabelWorks LW-PX700

Brands by name

Popular brands