Epson LabelWorks LW-PX700 User Manual Download Page 9

Page: 9 / 58

Frame and Table Lists

Start Here

1. Installing the Li-ion battery

Before using the printer for the first time, charge the

Li-ion battery (C52CE97010). Read also the safety

precautions for the rechargeable battery described

previously in this manual.

For details on the handling of Li-ion battery, see

"C52CE97010 Lithium-ion Battery Pack User's Manual".

Charging the Li-ion battery

You can charge the dedicated Li-ion battery (C52CE97010)

with the printer.

To charge the battery, connect the AC adapter to

the printer with the Li-ion battery installed.

Charging error

Charging completed

Charging

Charge LED

WARNING

Be sure to use the dedicated Li-ion battery (C52CE97010) . Using a battery

other than the one specified may cause fire, explosion, leakage, overheating

or ohter damage.

CAUTION

When disposing of used batteries, make sure to follow the regulations.

1. Open the battery cover.

2. Install the Li-ion battery in the

correct orientation.

3. Close the battery cover.

MEMO

• The Li-ion battery cannot be charged while printing.

• When the power of the charged Li-ion battery seems to run out quickly,

replace it with new ones.

• There is likely to be a charging error or battery error in the following cases.

Contact K-Sun customer support center.

-The charge LED flashes during charging.

-New Li-ion battery takes significantly longer to charge than the

estimated charging time (less than 3 hours).

Summary of Contents for LabelWorks LW-PX700



























































Search results

Summary of Contents for LabelWorks LW-PX700

Reviews:

Related manuals for LabelWorks LW-PX700

Brands by name

Popular brands

Epson LabelWorks LW-PX700, User Manual

Search results

Summary of Contents for LabelWorks LW-PX700

Reviews:

Related manuals for LabelWorks LW-PX700

Brands by name

Popular brands