❏
Select
Document Mode
as the
Mode
in Epson Scan 2. Scan using the settings for documents in
Document
Mode
.
❏
In
Document Mode
in Epson Scan 2, when
Image Type
on the
Main Settings
tab is set to
Black & White
,
adjust
Threshold
on the
Advanced Settings
tab. When you increase the
Threshold
, the black color area
becomes larger.
❏
If the resolution is low, try increasing the resolution and then scanning.
Related Information
&
“Scanning Documents (Document Mode)” on page 57
Moiré Patterns (Web-Like Shadows) Appear
If the original is a printed document, moiré patterns (web-like shadows) may appear in the scanned image.
❏
On the
Advanced Settings
tab in Epson Scan 2, set
Descreening
.
❏
Change the resolution, and then scan again.
Related Information
&
“Scanning Using Epson Scan 2” on page 57
Cannot Scan the Correct Area on the Scanner Glass
❏
Make sure the original is placed correctly against the alignment marks.
❏
If the edge of the scanned image is missing, move the original slightly away from the edge of the scanner glass.
❏
When placing multiple originals on the scanner glass, make sure there is a gap of at least 20 mm (0.79 in.)
between the originals.
Related Information
&
“Placing Originals on the Scanner Glass” on page 34
Cannot Preview in Thumbnail
❏
When placing multiple originals on the scanner glass, make sure there is a gap of at least 20 mm (0.79 in.)
between the originals.
❏
Check that the original is placed straight.
❏
Depending on the original, previewing may not be performed in
Thumbnail
. In this situation, scan in
Normal
preview, and then create marquees manually.
User's Guide
Solving Problems
119
