Epson L121, User Manual

Page: 94 / 124

94
Product Lights Turn On and then Turn Off
The product voltage may not match the electrical outlet rating. Unplug it immediately and check the label
on the back of the product for its voltage rating.
Caution: If the voltage rating does not match, do not plug your product back in. Contact Epson for
support.
Parent topic: Solving Setup Problems
Related references
Where to Get Help
Product Does Not Turn On or Off
If you cannot turn the product on or off, try these solutions:
• If you cannot turn on your product, make sure the power cord is securely connected and hold down
the power button a little longer.
• If you cannot turn off your product, hold down the power button a little longer. If you still cannot turn off
your product, unplug the power cord, plug the power cord back in, then turn your product on and off
again using the power button.
Parent topic: Solving Setup Problems
Solving Paper Problems
Check these sections if you have problems using paper with your product.
Paper Feeding Problems
Paper Jam Problems
Paper Ejection Problems
Parent topic: Solving Problems
Paper Feeding Problems
If you have problems feeding paper, try these solutions:
• If paper does not feed for printing, remove it. Then reload it in the rear paper feed against the right side
and beneath the tab. Slide the edge guide against the edge of the paper, making sure that the paper
stack is not above the arrow mark on the edge guide.
• Place the product on a flat surface.